Sheet View Settings Block should be 8-14 bytes long in BIFF8 Excel 97 according
to the open office file format documentation. However access to byte 10 and 12 is
not possible when record data is malformed, so getUInt2d throws notice.
* Initial work modifying the way named ranges are stored, and handled by the calculation engine
This should provide better support for:
- both union and intersection operators in composite named range values
- MS Excel implementation of the union operator duplicating values
- named formulae
- named ranges and formulae that reference other named ranges and formulae
- ranges and formulae that reference multiple ranges across multiple worksheets
* Initial work on handling defined names (named ranges and named formulae) correctly
- UTF-8 names (already extracted as a separate PR and merged)
- distinction between named ranges and named formulae
- correct handling of union and intersection operators in named ranges
- correct evaluation of named range operators in calculations
- calculation support for named formulae
- support for nested ranges and formulae (named ranges and formulae that reference other named ranges/formulae) in calculations
* Minor tweaks before resolving merge conflicts
* Fix extractSheetTitle() method to work on the last ! in a cell reference rather than the first
* Throw exception if a the reference to a defined name in a formula doesn't exist as a defined name
* Properly assess scope for defined names in calculation engine
* Elimination of some redundant code
* Minor tweaks to simplify entries o the stack where we need to check type
* Ensure correct scoping rules are applied when evaluating named ranges and formulae
* Adjustments to Gnumeric Reader for new defined names structure
* Initial work modifying the Ods Reader to handle named ranges, they weren't actually supported previously... this is still ongoing work
* Handle Ranges formatted as 3-d ranges, as long as the references are both to the same worksheet
* Additional testing for Named Ranges formatted as 3-d ranges, as long as the references are both to the same worksheet
* Skip composite named range tests for the moment
* Clean handling for `undefined name` exception when thrown in the calculation engine. Catch and replace with `#NAME?`
* Adjust method we use to determine whether a defined name is a range or a formula
* PHPCS Recommendations
* PHP doesn't support `mixed` yet, at least not at the minium version that we're working with
* More phpcs fixes
* More phpcs appeasements
* Final phpcs fixes for the moment
Still have a lot of echo and var_dump() statements in the code that scrutinizer will hate, but they stay for the moment while this is still WIP
* Please let this be the last of the phpcs fixes
* Unit tests to determine whether a defined name value is a range value or a formula
* phpcs appeasement
* Named tests from provider
* Initial steps for named ranges and formulae in the Ods Reader
* Reading pseudo-3d range addresses in Ods; treat second sheet reference as being identical to the first, which is the majority of cases where this will occur
* Initial work on Gnumeric reader for named ranges and formulae
* Suppress debug logging again
* Remove more debugging displays
* Last minor tweaks before phase two
* Minor refinements
* And all for the want of a space
* A little tidying up
* More tidying up
* phpcs fix
* Modify defined names in rebindParent()
* Renaming variables
* Resolve an issue with locally scoped defined names that don't contain any worksheet reference
* Keep phpcs happy
* Fix quote handling in regexp
* Fix a couple of scrutinizer issues
* Fix a couple of scrutinizer issues
* Update Xlsx Writer to work with the new defined name internal definition
Additional validation checks
* When adding new defined names through the readers, worksheet may not exist if we're only loading selected sheets rather than the full spreadsheet
* If the only thing that phpcs can pickup on is strings in double quotes instead of single quotes, then I know I'm getting close to ready
* Refactor Defined Names logic for Xlsx Writer into its own class
* phpcs keeping me on my toes
* Restore a couple of files that I managed to change without intending to
* Initial work on Ods Write to provide support for saving named ranges and formulae
* Resolve commas to semi-colons s argument separator when writing named formulae for Ods
* Extract Named Expression Writer for Ods into its own class
* Keep phpcs happy
* Refactoring of formula conversion when reading SpreadsheetML; preparation for reading named ranges because they will also need to use the same conversion method
* First pass at reading Named Ranges/Formulae from SpreadsheetML format xml files
* Remove unused namespace reference
* Defined names being written correctly for Xls; but not yet writing cell formulae that reference those defined names... that's the next big step
And I anticipate that defined names that reference other defined names will also be a problem
* Just to keep phpcs happy
... and yes, I know that there are still diagnostic echo statements in the code
* I had to miss some of the phpcs issues didn't I
* Work on the Xls Writer's Parser Tree to identify named range tokens in a formula, and to distinguish them from function tokens
* Still working on packing that d*** defined name reference in the writer
* Throw an exception in the Parser for saving Xls output if we encounter a defined name in a formula... writer will simply write the calculated cell value, and not the formula as at present
Strip out diagnostic output
* Some phpcs appeasement
* Fix a couple of Scrutinizer issues
* Additional verifications to differentiate a formula from a range value
Add explicit getters/setters for named ranges, named formulae and defined names
Additional unit tests
* Styling for closures
* Remove redundant docblocks
* Spaces
* Gah! Namespace use complaints
* Consistency of making calls to DefinedName rather than NamedRange; NamedRange should now be used only for Named Ranges, and should exclude Named Formulae
* Styling
* spurious newline
* No need to test for variable === null when we're typing it in the function argument definition
* Additional unit tests for local/global scoped named ranges and formulae; and a fix to getNamedFormula()
* Fix silly typo that led to breaking test
* Void return signature for unit tests
* Why weren't these picked up in the last pass?
* Refactoring of getNamedRange()/getNamedFormula()
* Eliminate unused constants, and defaults for private method parameters when always called with a value
* Use strict comparisons when comparing object hash codes
* Initial update to documentation for working with named formulae
* Fix for calculation of relative cell references in named ranges/formulae
* Fix current named range tests, because we should be using absolute references; tests for relative named ranges to be added later
* Fix for calculation of relative cell references in named ranges/formulae
* Updates to changelog and documentation for handling of absolute/relative references in named ranges
* Fix last remaining unit test with a named range reference
* Refactor formula conversion for Ods into a separate class; I hadn't realised that it previously wrote formulae as the MS Excel syntax without any conversion to Ods format
* Fix Ods Writer test xml to reflect Ods-native format for formula
* Docblocks
* Drop dollar prefix from Ods formulae and ranges unless it's necessary
* Set the formula convertor in the content writer constructor
* Documentation update
* Minor updates
* Remove var_dumps from file
* Fix the spurious single quote that was breaking named expressions in the Ods Writer... big sigh of relief that I finally spotted it
* Starting work on documentation for Defined Names, and some examples of using Named Ranges and Formulae
* Starting work on documentation for Defined Names, and some examples of using Named Ranges and Formulae
* Example of a relative named range for the documentation
* Mustn't have phpcs problems in sample code either
* More updates to the documentation
* That should conclude the documentation for Named Ranges, now time to move on to documenting Named Formulae
* That should conclude the documentation for Named Ranges, now time to move on to documenting Named Formulae
* PHPCS appeasement in sample code
* Initial documentation on Named Formulae
* PHPCS appeasements
* Additional comments in the documentation, and modify the named range name validation to support a \ as the first character in a name
* Fix breaking build
* Make defined names case-insensitive
* Fix case-insensitivity
* Improved documentation, and additional unit tests
* Additional unit tests, and a fix for removing a globally scoped defined name even if a worksheet is specified in the method call
* Fix unit test for removing named formulae
* Use assertCount instead of assertSame
* Forgotten voids
* Fix arguments for assertCount
* Unit tests for removing defined names, and a fix for removing locally scoped names
* Unit tests for absolute and relative named ranges in calculation engine, and fix an issue with worksheet name in the offset adjustments for relative references
* PHPCS Appeasement
* Additional unit tests, more documentation, and a fix to the calculation engine when no worksheet reference is provided with a named formula
* PHPCS appeasements
* Additional documentation and examples of using Named Formulae
* Additional examples to go with documentation
* A few minor phpcs appeasements
* Minor refactor of updateFormulaReferencesAnyWorksheet() method
* Discard an unused method argument
* Additional unit tests
* Additional unit tests
* Remove unused argument
* Stricter typing
* Fix return typehinting from remove named range/formula; should return the Spreadsheet object
* Use return typehint of self rather than explicit object type
* Redundant code just to keep scrutinizer happy
* Minor change to handle merge conflict
* phpcs fixes after merge
* Namespace usage ordering
* Please let this be the last phpcs fix needed
Co-authored-by: Adrien Crivelli <adrien.crivelli@gmail.com>
* Improve Coverage for ODS Reader
Reader/ODS/Properties is now 100% covered.
Reader/ODS is covered except for 1 statement. As the original author
put it, "table-header-rows TODO: figure this out ... I'm not sure that
PhpExcel has an API for this". I'm still thinking about it, but, so far,
I agree with the author.
There are minimal code changes.
- Several places test !zip->open() to see whether the test failed.
However, zip->open() returns true or a string, so the test never
detects failure. Change to zip->open() !== true. No previous tests.
- Suppress warning messages from simplexml_load_string (there had
been no tests for invalid xml).
- One document property was misnamed, and one non-existent property
was tested for.
I added a number of tests, creating an ODS directory, and moving
OdsTest to that directory.
* Scrutinizer Recommendation
Unused variable in one test.
* Update CHANGELOG
Co-authored-by: Adrien Crivelli <adrien.crivelli@gmail.com>
* `GAUSS()` and `GAMMA()`, `NORM.S.DIST()`, `LOGNORM.DIST()` and `F.DIST()` function implementations, and further unit tests for a number of the statistical functions
Co-authored-by: Adrien Crivelli <adrien.crivelli@gmail.com>
HTTP client must be configured via `Settings::setHttpClient()`. This is
a small breaking change, but only for the very few people who started using
WEBSERVICE from last version.
Fixes#1562Closes#1568
If BIFF5 excel 95 file doesn't have codepage record, the default codepage CP1252 is used and can't be change.
That causes to problems with decoding cyrillic text.
If row or column dimensions are accessed, then HTML writer would
still generate lots of empty cells, to show nothing at all. This
now ignore row and column dimensions to only output cell that
actually exists (even if those cells are empty).
Fixes#1235Close#1537
Fixes a bug when doing a HLOOKUP on a single row.
```php
<?php
require 'vendor/autoload.php';
use PhpOffice\PhpSpreadsheet\Spreadsheet;
$spreadsheet = new Spreadsheet();
$sheet = $spreadsheet->getActiveSheet();
/**
* Single row.
*/
$singleRow = "=HLOOKUP(10, {5, 10, 15}, 1, 0)";
$sheet->getCell('A1')->setValue($singleRow);
// Should echo 10, but echos '#N/A' and some PHP notices and warnings.
echo $sheet->getCell('A1')->getCalculatedValue() . PHP_EOL;
/**
* Multiple rows.
*/
$multipleRows = "=HLOOKUP(10, {5, 10, 15; 20, 25, 30}, 1, 0)";
$sheet->getCell('A2')->setValue($multipleRows);
// Should echo: 10 and also does.
echo $sheet->getCell('A2')->getCalculatedValue() . PHP_EOL;
```
Co-authored-by: Mark Baker <mark@lange.demon.co.uk>
For functions introduced in Excel 2010 and beyond, Excel saves them
in formulas with the xlfn_ prefix. PhpSpreadsheet does not do this;
as a result, when a spreadsheet so created is opened, the cells
which use the new functions display a #NAME? error.
This the cause of bug report 1246:
https://github.com/PHPOffice/PhpSpreadsheet/issues/1246
This change corrects that problem when the Xlsx writer encounters
a 2010+ formula for a cell or a conditional style. A new class
Writer/Xlsx/Xlfn, with 2 static methods,
is introduced to facilitate this change.
As part of the testing for this, I found some additional problems.
When an unknown function name is used, Excel generates a #NAME? error.
However, when an unknown function is used in PhpSpreadsheet:
- if there are no parameters, it returns #VALUE!, which is wrong
- if there are parameters, it throws an exception, which is horrible
Both of these situations will now return #NAME?
Tests have been added for these situations.
The MODE (and MODE.SNGL) function is not quite in alignment with Excel.
MODE(3, 3, 4, 4) returns 3 in both Excel and PhpSpreadsheet.
However, MODE(4, 3, 3, 4) returns 4 in Excel, but 3 in PhpSpreadsheet.
Both situations will now match Excel's result.
Also, Excel allows its parameters for MODE to be an array,
but PhpSpreadsheet did not; it now will.
There had not been any tests for MODE. Now there are.
The SHEET and SHEETS functions were introduced in Excel 2013,
but were not introduced in PhpSpreadsheet. They are now introduced
as DUMMY functions so that they can be parsed appropriately.
Finally, in common with the "rate" changes for which I am
creating a pull request at the same time as this one:
samples/Basic/13_CalculationCyclicFormulae
PhpUnit started reporting an error like "too much regression".
The test deals with an infinite cyclic formula, and allowed
the calculation engine to run for 100 cycles. The actual number of cycles
seems irrelevant for the purpose of this test. I changed it to 15,
and PhpUnit no longer complains.
All chart examples passed the displayBlanksAs parameter as 0 instead of 'gap'.
I added a constants EMPTY_AS_GAP, EMPTY_AS_ZERO and EMPTY_AS_SPAN to the
DataSeries and then change all chart samples to use this new constant.
Fixes#1337Closes#1448
MarkBaker